smartctl version 5.34 [i686-pc-linux-gnu] Copyright (C) 2002-5 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda ATA IV family Device Model: ST380021A Serial Number: 3HV11060 Firmware Version: 3.75 User Capacity: 80,026,361,856 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Tue Mar 7 13:01:38 2006 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: FAILED! Drive failure expected in less than 24 hours. SAVE ALL DATA. See vendor-specific Attribute list for failed Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 422) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 57) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 072 069 034 Pre-fail Always - 24248144 3 Spin_Up_Time 0x0003 083 078 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 90 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 051 050 030 Pre-fail Always - 4071751205595 9 Power_On_Hours 0x0032 081 081 000 Old_age Always - 16970 10 Spin_Retry_Count 0x0013 094 094 097 Pre-fail Always FAILING_NOW 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 797 194 Temperature_Celsius 0x0022 040 057 000 Old_age Always - 40 195 Hardware_ECC_Recovered 0x001a 072 069 000 Old_age Always - 24248144 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 001 000 Old_age Always - 17422 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 21518 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 21518 occurred at disk power-on lifetime: 14480 hours (603 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 50 cb 10 e0 Error: ICRC, ABRT at LBA = 0x0010cb50 = 1100624 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 60 50 cb 10 e0 00 00:28:36.204 READ DMA c8 00 60 50 cb 10 e0 00 00:28:35.818 READ DMA 10 00 3f 00 00 00 e0 00 00:28:35.818 RECALIBRATE [OBS-4] c8 00 60 50 cb 10 e0 00 00:28:35.436 READ DMA c8 00 60 50 cb 10 e0 00 00:28:35.046 READ DMA Error 21517 occurred at disk power-on lifetime: 14480 hours (603 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 50 cb 10 e0 Error: ICRC, ABRT at LBA = 0x0010cb50 = 1100624 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 60 50 cb 10 e0 00 00:28:35.818 READ DMA 10 00 3f 00 00 00 e0 00 00:28:35.818 RECALIBRATE [OBS-4] c8 00 60 50 cb 10 e0 00 00:28:35.436 READ DMA c8 00 60 50 cb 10 e0 00 00:28:35.046 READ DMA c8 00 18 38 cb 10 e0 00 00:28:35.045 READ DMA Error 21516 occurred at disk power-on lifetime: 14480 hours (603 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 50 cb 10 e0 Error: ICRC, ABRT at LBA = 0x0010cb50 = 1100624 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 60 50 cb 10 e0 00 00:28:35.436 READ DMA c8 00 60 50 cb 10 e0 00 00:28:35.046 READ DMA c8 00 18 38 cb 10 e0 00 00:28:35.045 READ DMA c8 00 28 10 cb 10 e0 00 00:28:35.045 READ DMA c8 00 38 d8 ca 10 e0 00 00:28:35.044 READ DMA Error 21515 occurred at disk power-on lifetime: 14480 hours (603 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 50 cb 10 e0 Error: ICRC, ABRT at LBA = 0x0010cb50 = 1100624 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 60 50 cb 10 e0 00 00:28:35.046 READ DMA c8 00 18 38 cb 10 e0 00 00:28:35.045 READ DMA c8 00 28 10 cb 10 e0 00 00:28:35.045 READ DMA c8 00 38 d8 ca 10 e0 00 00:28:35.044 READ DMA c8 00 10 c8 ca 10 e0 00 00:28:35.043 READ DMA Error 21514 occurred at disk power-on lifetime: 14480 hours (603 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 58 c9 10 e0 Error: ICRC, ABRT at LBA = 0x0010c958 = 1100120 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 60 58 c9 10 e0 00 00:28:34.595 READ DMA c8 00 10 48 c9 10 e0 00 00:28:34.594 READ DMA c8 00 80 c8 c8 10 e0 00 00:28:34.593 READ DMA ca 00 08 38 b5 08 e0 00 00:28:34.593 WRITE DMA ca 00 08 68 3d 0a e0 00 00:28:34.593 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 16969 - # 2 Extended offline Aborted by host 20% 16967 - Device does not support Selective Self Tests/Logging